Peristaltic Pump Dispenser UNAP RS485 6 l/min

Peristaltic Pump UNAP RS485 6

The peristaltic pump works on the principle of forced displacement. The rollers fixed on the motor axis rotate in the cassette of the peristaltic head and squeeze the tube, forcing the fluid to be pumped through the tube. When using this method of pumping liquid, you do not need to worry that the pumped liquid will come into contact with any moving parts of the pump, you will no longer need to use flow meters and you will be able to measure the amount of pumped liquid regardless of its viscosity and density. Peristaltic pump dispenser, equipped with a controller that controls the speed of rotation of the engine, which allows dispensing with a capacity of up to 900 doses / hour, the controller allows you to control the direction of pumping liquid (direct / reverse) and is equipped with an external pedal to control dispensing in manual mode. The controller also has the ability to connect an external control signal through a serial data interface to organize the operation of the dispenser as part of industrial filling lines and automatic dispensing systems.

Operating modes:
- Work in pump mode.
- Work in dispenser mode.
- Operation in external control mode from the RS485 port.

- Control of dosing speed.
- Setting the size of the dose of the product (settable value from 1 to 9999 ml).
- Changing the direction of fluid pumping (reverse)
- Controlling the dispenser with a pedal.
- "Drop cut-off" function to prevent dripping.
- Smooth start.
- Integration into filling lines.
- Calibration of the dispenser.
- Remote control of the dispenser operation via the RS485 data transfer protocol.

To increase productivity, it is possible to install up to 4 peristaltic heads per dispenser.

Head body material: PC (polycarbonate) or ABS (acrylonitrile butadiene styrene) or PPS (polyphenylene sulfide).
Roller material: stainless steel.
Number of rollers: 3 pcs.
Productivity for each channel from 0.3 to 6 000 ml/min.
Dose volume: 0.01-9990 ml.
Speed: 1 - 600 rpm.
Reverse suction angle: 0-360 degrees (graduation 18 degrees).
Supply voltage: AC 220V +/-10% 50/60Hz (standard), AC 110V +/-10% 50/60Hz (optional).
Power consumption: < 50W.
Working temperature: 0-40 degrees Celsius.
Relative humidity: < 80%.
Protection degree: IP 31.
Dimensions: (L W H): 202 x 160 x 239 (mm) (with 1 head).
External signal control: start / stop, forward / reverse, 0-5 V, 0-10 V, 4-20 mA.
Digital control channel: RS485.

Tube size - Flow rate at a speed of 0.1-600 rpm.
15# - 0.3~1800 ml/min.
24# - 0.5~3000 ml/min.
35# - 0.7~4200 ml/min.
36# - 1.0~6000 ml/min.

Dispenser with 1 head - 1550 $,
Dispenser with 2 heads - 1860 $,
Dispenser with 3 heads - 2170 $,
Dispenser with 4 heads - 2480 $.