The peristaltic pump works on the principle of forced displacement. The rollers fixed on the motor axis rotate in the cassette of the peristaltic head and squeeze the tube, forcing the fluid to be pumped through the tube. With this method of pumping liquid, you do not need to worry about the liquid being pumped in contact with any moving parts of the pump. Peristaltic pump, equipped with a controller that controls the speed of rotation of the engine, the controller allows you to control the direction of pumping liquid (forward / backward). To increase productivity, it is possible to install up to 4 peristaltic heads per pump.
Specifications
Head body material: PESU (polyethersulfone) or PPS (polyphenylene sulfide).
Roller material: stainless steel.
Number of rollers: 2 pcs.
Productivity for each channel from 0.07 to 2 280 ml/min.
Dose volume: 0.01-9990 ml.
Speed: 1 - 600 rpm.
Reverse suction angle: 0-360 degrees (graduation 18 degrees).
Supply voltage: AC 220V +/-10% 50/60Hz (standard), AC 110V +/-10% 50/60Hz (optional).
Power consumption: < 50W.
Working temperature: 0-40 degrees Celsius.
Relative humidity: < 80%.
Protection degree: IP 31.
Dimensions: (L W H): 202 x 160 x 239 (mm).
Tube size - Flow rate at a speed of 0.1-600 rpm.
13# - 0.007~42 ml/min.
14# - 0.027~162 ml/min.
16# - 0.082~492 ml/min.
17# - 0.29~1740 ml/min.
18# - 0.38~2280 ml/min.
19# - 0.051~306 ml/min.
25# - 0.17~1020 ml/min.
Price:
Dispenser with 1 head - 1000 $,
Dispenser with 2 heads - 1190 $,
Dispenser with 3 heads - 1380 $,
Dispenser with 4 heads - 1570 $.